CFB氨綸包芯紗裝置

CFB spandex core-spun yarn device

    適用于國內外各種棉、毛紡細紗機。適紡棉、毛及棉型化纖。

紗支可紡10s-80s。增加導絲機設備，也可紡非彈力絲。

    Applicable to the domestic and foreign various kinds of cotton and wool spinning machines to spin cotton, wool and cotton-type chemical fibers. It can spin yarn count of 10S-80S. Adding yarn guide equipment, it can also spin non-elastic yarn.

結構特點：

1.退繞羅拉采用不銹鋼復合管制作、表面光滑、不掛花。徑向跳動≤0.2mm。

2.退繞羅拉采用可脫卸式，方便維護。

3.傳動方式采用鏈輪傳動，經變換工藝輪調整牽伸倍數。

4.退繞羅拉連接軸，軸承采用加油設計，延長使用壽命。

5.導絲輪可選配，下圖為導絲輪圖片。

Structure Characteristics:

1. Unwinding roller is made of stainless steel compound pipe, with smooth surface and no fluff. And radial run-out ≤ 0.2mm.

2. Unwinding roller is detachable type, with convenient maintenance.

3. Driving mode adopts sprocket driving to adjust drafting times by changing process wheel.

4. Unwinding roller coupling shaft and bearing adopts oiling design to prolong service life.

5. Yarn guide wheel is option: yarn guide wheel picture attached.

非彈力包芯紗裝置

Non-elestic core-spun yarn desive

適用與國內外各種細紗機

1.在原細紗機粗紗架上部，加裝長絲架。粗紗架到天花板，需750mm以上的空間。

2.長絲引出后，有導紗鉤固定其位置，導絲鉤安裝方便。

3.紡制方法：在長絲架上，排放滌綸或錦綸長絲，通過張緊器（或導紗管）控制長絲張力，經過導絲輪后直接導入前羅拉與牽伸后的純棉須條一起合并，再經過加捻紡成包芯紗。

Applicable to domestic and overseas various kinds of spinning machine

1. On the creel upper of original spinning machine is equipped with filament farme. Space from creel frame to ceiling needs 750mm above; 

2. After drawn out, the filament will be fixed by yarn-guide hook and it is convenient to install yarn-guide hook.

3. Spinning method: Arrange terylene or nylon filament on filament frame, control filament tension with tensioner (or yarn-guide tube), directly guide in front roller through yarn-guide wheel, combined with the drafted pure cotton sliver and spin to be core-spun yarn.

雙芯包芯紗裝置

Double-croe core-spun yarn

雙芯包芯紗裝置結構為長絲，氨綸包芯紗裝置結構相結合，長絲在氨綸包芯紗裝置上加裝一套控制長絲主動喂入裝置。

長絲主動喂入裝置有伺服電機、控制編碼器、導絲羅拉、張力控制器、皮輥等組成。

Dual-core core-spun yarn device structure is combined by filament yarn and spandex core-spun yarn device structures. For filament yarn, add a set of devices in spandex core-spun device to control filament yarn to be actively fed.

Filament actively-fed device consists of servo motor, control encoder, guide roller, tension controller and rubber roller, etc.